“"Excellent practice questions with clear explanations."”
Ajay Verma
Network Engineer
The Juniper Networks Certified Professional, Enterprise Routing and Switching (JNCIP-ENT) credential is earned by passing a single written exam, JN0-650. It targets network engineers who already run Junos OS based enterprise networks and want to prove advanced skills in OSPF, BGP, IP multicast, Layer 2 switching, Class of Service, and EVPN. It sits above JNCIS-ENT in Juniper’s enterprise track and below the JNCIE expert level.
JNCIP-ENT is aimed at experienced networking professionals with advanced Junos knowledge. Passing shows that you can configure, monitor, and troubleshoot enterprise routing and switching features rather than just describe them. Questions lean toward scenarios: you read a configuration or an operational output and decide what is happening or what should change.
Juniper’s enterprise track runs from JNCIA-Junos, to JNCIS-ENT, to JNCIP-ENT, and finally to JNCIE-ENT. JNCIP-ENT is the professional rung, so the exam assumes you are comfortable with Junos fundamentals and specialist level switching and routing before you start.
Juniper introduced a new JNCIP-ENT exam on November 10, 2025, and that exam is JN0-650. It replaces JN0-649. According to one third party study guide, the newer exam dropped IS-IS, high availability topics (GRES, NSR, NSB), and GRE tunnels, and added EVPN. Juniper lists Junos OS v25.2 as the software version for the exam. If you are using older study material written for JN0-649 or JN0-648, compare it against the current objectives before relying on it.
Juniper lists the exam at 90 minutes with 65 multiple choice questions. Pass or fail status is shown immediately after the exam, and the exam is offered only in English. Candidates book through Pearson VUE, which delivers the exam.
Juniper does not appear to publish a score needed to pass or percentage weights for each domain on its public pages. Treat any weighting you see on third party sites as an estimate, and check the official objectives page for the current position.
The current blueprint is described as having eight official objective areas:
Interior Gateway Protocols: OSPFv2 and OSPFv3 concepts, area types, summarization, and troubleshooting.
Border Gateway Protocol: session behavior, route selection, and routing policy.
IP multicast: IGMP and PIM, including source specific multicast and multicast policy.
Ethernet switching and spanning tree: filter based VLANs, private VLANs, MVRP, Layer 2 tunneling with Q-in-Q and L2PT, and advanced spanning tree such as MSTP and VSTP.
Layer 2 authentication and access control: port based authentication and how multiple access control methods interact.
IP telephony features: Power over Ethernet, LLDP and LLDP-MED, and voice VLANs.
Class of Service: how CoS is processed on Junos devices in Layer 2 and Layer 3 networks.
EVPN: route types, VXLAN, and multihoming concepts, covering configuration, monitoring, and troubleshooting.
Juniper’s recommended training includes the Advanced Junos Enterprise Routing (AJER) and Advanced Junos Enterprise Switching (AJEX) courses, along with the Juniper TechLibrary documentation. Juniper states these resources are not required and do not guarantee a pass Begin your preparation with a free EC-Council Certified CISO (C|CISO) practice test.
Earlier versions of Juniper’s JNCIP-ENT materials listed JNCIS-ENT as the prerequisite certification. Some training providers describe it as recommended rather than strictly required, so wording varies between sources. Because this can change, confirm the current requirement on Juniper’s JNCIP-ENT page before you book.
Registration goes through Juniper’s certification program and Pearson VUE. In general, you create or sign in to your Juniper certification account, choose the JN0-650 exam, select a test center or an available online delivery option, and pay the exam fee. Exact steps, accepted ID, rescheduling windows, and online proctoring rules are set by Pearson VUE and Juniper, so follow their current instructions instead of relying on a third party summary.
On cost, one training provider lists the exam at USD 400, but pricing depends on region, taxes, and any voucher you use. Check the checkout page for the figure.
JNCIP-ENT is relevant if your daily work involves Junos on EX, QFX, or MX platforms in campus, branch, or data center networks. The domains map directly to tasks: tuning OSPF areas, shaping BGP policy at the enterprise edge, delivering multicast, securing access ports with 802.1X, supporting IP phones, applying CoS for voice and critical traffic, and running EVPN VXLAN fabrics.
It also helps as a stepping stone. One training provider notes that recertification can be done by passing the current JNCIP-ENT exam or the JNCIE lab exam, so the credential leads naturally toward expert level study. It is most valuable to engineers at organizations that standardize on Juniper, and less relevant if your environment is entirely another vendor.
Hands on time with a Junos device or virtual lab matters most for this exam, since many questions ask you to interpret configuration and command output. Practice tests are a useful supplement for finding gaps. After each attempt, review the explanations for questions you missed and return to the matching domain, such as spanning tree or BGP policy. AllExamQuestions.com offers free JN0-650 practice questions you can use alongside lab work and Juniper’s own documentation.
Last updated on Oct, 31 2026